IF-PRO Ice Hockey Goal Net IIHF Match MK72530 (Set of 2)

INSTALLATION INSTRUCTIONS:
– The goal net must hang freely from the steel goal frame and is attached so that two seams on the net mirror the upper rear reinforcement of the goal frame.
– The net is attached to the goal frame using the cord provided. Fold the supplied rope in half and continue so that the centre of the upper part of the net is tied with the rope to the centre of the upper goal frame – the crossbar. Then continue tying evenly on both sides, i.e. to the right and left. The seams on the net copy the upper reinforcement of the gate frame and end in the lower corner of the gate at the junction of the gate post and the lower rear gate reinforcement.
– We finish tying at the lower arch of the gate in the middle, i.e. at the rear vertical centre post.
– The net meshes should run in rows and regularly from the top of the rear vertical post to the lower gate stiffener.
– The net can be adjusted to the structure – it can be made smaller by attaching 2 meshes to the lower rear gate arch.

IMPORTANT: The net must not be taut on the goal frame!

Following the specified procedure for hanging the net will significantly extend the service life of the net on the goal frame.

ADDITIONAL INFORMATION:
To extend the service life of the goal net, it can be supplemented with a goal safety net. (optionally available, item numbers 41173 and 41174, various designs)